CNC Machining & Fabrication Equipment
Large-part machining, heavy handling and inspection: 250,000 sq ft under one roof, 22 overhead cranes rated up to 100,000 lb, operating 20 hours a day.
Facility at a glance
22 overhead cranes
Lifting capacity up to 100,000 lb across the plant.
18 milling machines
Reported total, with 3-, 4- and 5-axis capability.
23 CNC lathes
Reported total, plus 6 engine lathes.
20 hours a day
The shop runs 20 hours a day to meet customer needs.
Featured
Mighty Viper bridge mill
PMW10242AD
- Work envelope (X × Y × Z)
- 398 × 165 × 116 in
- X travel / Y travel
- 399 in / 165 in
- Table load capacity
- 100,000 lb
- Spindle
- #50 taper, 8,000 rpm, 60 hp
- Control
- Fanuc, W-axis crossrail
The 100,000 lb rating is the load capacity of the machine table. It is separate from the plant’s overhead cranes, which are also rated up to 100,000 lb.
Selected machines
Complete facility list
130 machines and inspection systems, plus engineering software.
Itemized as published on the CBM facility list, including manual machines. The 18 milling machines, 23 CNC lathes and 6 engine lathes quoted elsewhere are CBM’s reported department totals.
5-axis machining
Multi-tasking mill-turn centers for large, complex parts finished in one setup.5-Axis Machining
| Machine | Capacity / notes | Qty |
|---|---|---|
| Mazak INTEGREX e-1850V/12 II | 72 × 98 × 98 in capacity mill-turn, dual pallet table, 72 in chuck | 1 |
| Mazak INTEGREX e-670H II | 42 in OD × 240 in long | 1 |
| Mazak INTEGREX 650 | 32 in OD × 180 in long | 1 |
| Mazak INTEGREX e-1550 | Dual chucks, 78 in OD turning | 1 |
| Mazak INTEGREX e-1550V/10 II | Two pallets | 1 |
CNC lathes & turning
CNC lathes and turning centers for shafts, rolls and other round parts.CNC Turning
| Machine | Capacity / notes | Qty |
|---|---|---|
| Mazak Slant Turn 50 | 30 × 120 in | 4 |
| Mazak Slant Turn 60 | 60 × 160 (no unit published) | 1 |
| Mazak M4 | 16 × 60 in | 1 |
| Mazak 25L Quick Turning Center | 12 × 48 in | 1 |
| Mazak Quick Turning 28N | 12 × 42 in | 1 |
| Mazak QT-30 CNC Turning Center | — | 1 |
| Mazak QTN400M2KY | — | 1 |
| Mazak QT Nexus 400M2KY | 80 in, horizontal | 1 |
| Mazak QT 25L CNC Lathe | — | 1 |
| Mazak INTEGREX 50Y/1500 | — | 1 |
| Mazak 450-IIM QT Lathe | Live tooling | 1 |
| Mazak Quick Slant 30N CNC Turning Center | — | 1 |
| Mazak H400N 6 Pallet HMC | — | 1 |
| Mazak bed lathe | 18 × 60 in | 1 |
| Okuma LB15 Standard Bore CNC | — | 2 |
| Okuma Cadet turning lathe | — | 2 |
| Okuma CNC Lathe LC-10 | — | 1 |
| Victor lathe | 20 × 120 in | 1 |
| Poreba gap bed lathe | 36/47 × 157 in | 1 |
| Howa lathe | Model 43 × 150 | 1 |
| Bancroft dual-head welding lathe | — | 1 |
Horizontal mills & boring
Horizontal mills, boring mills and pallet-changing machining centers for multi-face and production work.CNC Milling
| Machine | Capacity / notes | Qty |
|---|---|---|
| Mitsubishi horizontal mill | 120 × 360 × 96 in, 78 × 78 in pallet indexing 360° | 1 |
| Doosan DBC-130L II | Horizontal boring mill | 1 |
| G&L boring mill | 55 × 72 × 58 capacity (no unit published) | 1 |
| Mazak HCN-6800 | — | 1 |
| Mazak 630, 10 pallet | 25 × 25 in | 1 |
| Mazak 400, 6 pallet | 20 × 20 in | 1 |
| Mori Seiki twin-pallet CNC horizontal | 16 × 16 in | 1 |
| Mazak 350 Quick Turn | — | 1 |
Vertical mills & gantry
Bridge, gantry and vertical machining centers, up to the Mighty Viper bridge mill.CNC Milling
| Machine | Capacity / notes | Qty |
|---|---|---|
| Mighty Viper PMW10242AD | 398 × 165 × 116 in work envelope, 100,000 lb capacity table | 1 |
| 5-sided gantry mill | — | 1 |
| Mazak AJV machining center | 60 × 160 in | 1 |
| Mazak FJV 60/160 | — | 1 |
| Mazak 815 × 120 milling machine | — | 1 |
| Mazak VTC-805G | — | 1 |
| Mazak VTC-20C | 20 × 50 in | 1 |
| Mazak 510C vertical machining center | 21 × 51 in table | 2 |
| Okuma Millac 1052V | — | 1 |
| Okuma vertical machining center | — | 1 |
| Haas VF-7 with 4th axis | 32 × 84 × 30 in | 1 |
| Haas VF-6 | 40 × 65 in | 1 |
| Haas VF-4 | 20 × 50 in | 1 |
| Mini Haas toolroom mill | 40 × 16 × 16 in, 7.5 hp | 1 |
| K&T Milwaukee vertical mill | 15 × 64 in table | 1 |
| Varnamo vertical mill | 13 × 64 in table | 1 |
| Ex-Cell-O CNC milling machine | Model 605AC | 1 |
| Ex-Cell-O milling machine | Model 602 | 1 |
| Bridgeport EZ TRAK | — | 1 |
| Bridgeport milling machines | — | 5 |
Engine lathes
Heavy-duty engine lathes for long and large-diameter shafts and rolls, including a Summit listed at 72 × 480 in.Machined Shafts
| Machine | Capacity / notes | Qty |
|---|---|---|
| Summit heavy-duty engine lathe | 72 × 480 in | 1 |
| Summit heavy-duty engine lathe | 52-6 × 240 in | 1 |
| Weipert lathe | 28 × 318 in | 1 |
| Victor lathe | 20 × 80 in | 2 |
| Victor lathe | 16 × 60 in | 3 |
Grinding & gear cutting
Cylindrical and surface grinding, gear hobbing and gear shaping.Gearbox Repair
| Machine | Capacity / notes | Qty |
|---|---|---|
| Cincinnati cylindrical grinder | 16 × 126 in | 1 |
| Mighty Precision cylindrical grinder | 13 × 40 in | 1 |
| AMW surface grinder | 10 × 20 in | 1 |
| D&B gear hob | Up to 60 in diameter | 1 |
| Fellows gear shaper | 10 in capacity | 1 |
| Bright tool grinder | — | 1 |
| Bench tool grinder | — | 2 |
| Sterling grinder | 2 – 2-1/2 in | 1 |
| Oliver drill grinder | Model 600, 3 in | 1 |
Cutting, forming & presses
Plasma cutting, press brake forming, straightening and hydraulic presses.Welding & Fabrication
| Machine | Capacity / notes | Qty |
|---|---|---|
| Retro Systems HD plasma cutting system | 10 × 25 ft | 1 |
| Pacific hydraulic press brake | 1,050 ton, 3/4 in × 22 ft | 1 |
| Anderson hydraulic rolling frame straightening press | 50 ton | 1 |
| Michigan 4-post hydraulic press | 100 ton | 1 |
| Hydraulic press | 100 ton | 1 |
| Hydraulic press | 100 ton, 50 × 30 in | 1 |
| Rodgers press | 50 ton | 1 |
| Hydraulic arbor press | 30 ton | 1 |
| Drake arbor press | — | 2 |
| Hand arbor press | — | 1 |
| Leland Gifford 4-head drill press | — | 1 |
Welding & thermal spray
MIG, TIG and arc welding equipment, plus flame spray metalizing.Welding & Fabrication
| Machine | Capacity / notes | Qty |
|---|---|---|
| Miller Syncrowave 350 | — | 8 |
| Lincoln 400 A MIG welder | — | 8 |
| Miller Dynasty 700 TIG welder | — | 2 |
| Lincoln wire welder | — | 5 |
| Lincoln HyperFill MIG welders | — | — |
| Miller 351 Syncrowave welder | — | 1 |
| Lincoln DC-250 arc welder | — | 1 |
| Acetylene welder | — | 1 |
| Metco 5K20 flame spray | Metalizing | 1 |
Quality & metrology
FARO laser tracking, portable CMM arms and granite surface plates.Quality Control
| Machine | Capacity / notes | Qty |
|---|---|---|
| FARO Laser Tracker Vantage | — | 1 |
| FARO Edge ScanArm HD | 8 ft | 1 |
| FARO Quantum Arm | 12 ft | 1 |
| FARO Gage Arm | 4 ft | 1 |
| Granite surface plate | 6 × 12 ft | 1 |
| Granite surface plate | 5 × 12 ft | 1 |
| Granite surface plate | 4 × 8 ft | 1 |
| Direct X | 1 seat | 1 |
Engineering software
CAD and CAM software for reverse engineering, drawings and programming.Engineering
| Machine | Capacity / notes | Qty |
|---|---|---|
| SolidWorks 2019 | Seats | 3 |
| Esprit 2019 | Seat | 1 |
| AutoCAD | — | — |
| Edgecam | — | — |
Find the right capability for your part
Not sure which department fits? Start with the part.
- Large plate, base or machined weldmentCNC Milling
- Long shaft or large-diameter rollCNC Turning
- Complex part with turned and milled features5-Axis Machining
- Fabricated structure, frame or lifting deviceWelding & Fabrication
- Worn gearbox or rotating equipmentGearbox Repair
- Part with no drawing, or one that needs inspectionEngineering
Have a part that needs this capacity?
Send drawings, photos or specifications. Our team will respond promptly.
What to include
- Drawings, 3D models or photos of the part
- Size and weight
- Material and grade
- Quantity
- Tolerances and inspection requirements
- When you need it
Common questions
What is the largest part CBM can machine?
The Mitsubishi horizontal mill handles 120 × 360 × 96 in, and the Mighty Viper bridge mill has a 398 × 165 × 116 in work envelope with a 100,000 lb capacity table. The Summit heavy-duty engine lathe is listed at 72 × 480 in. Send part dimensions and weight and we will confirm the right machine.
How much can CBM lift?
22 overhead cranes with a lifting capacity of up to 100,000 lb.
Which 5-axis machines does CBM run?
Five Mazak INTEGREX machines are listed for 5-axis machining: the e-1850V/12 II, e-670H II, INTEGREX 650, e-1550 and e-1550V/10 II. An INTEGREX 50Y/1500 is listed with the CNC lathes.
What inspection equipment is on site?
A FARO Laser Tracker Vantage, FARO Edge ScanArm HD (8 ft), FARO Quantum Arm (12 ft), FARO Gage Arm (4 ft) and granite surface plates up to 6 × 12 ft.
What hours does the shop run?
CBM operates 20 hours per day, and 24/7 emergency and rush service is available. Call 704-864-6084.